BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Yushin - Robotic Automation for the Plastics Industry - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Yushin - Robotic Automation for the Plastics Industry
X-ORIGINAL-URL:https://www.yushinamerica.com
X-WR-CALDESC:Events for Yushin - Robotic Automation for the Plastics Industry
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260317T100000
DTEND;TZID=America/New_York:20260319T170000
DTSTAMP:20260429T030239
CREATED:20260122T175546Z
LAST-MODIFIED:20260417T150247Z
UID:8441-1773741600-1773939600@www.yushinamerica.com
SUMMARY:Yushin America at PTXPO 2026 - Rosemont\, IL
DESCRIPTION:The Only North American Molding Industry Event in 2026!\n\nJoin us in Yushin America Booth# 527\nFind us on the show floor map\nThere’s still time to Register online!\nRegister for FREE at PTXPO 2026 on us \n\nWe are excited once again to be exhibiting at the Donald E. Stephen center for the PTXPO 2026 event! Yushin America will be in BOOTH#527 to deliver this fully functioning automation cell that will showcase our products and capabilities. Come by and learn about our products and solutions that can help with your next automation project! \nLearn more about the event here \nWe’re thrilled to offer you FREE Exhibit Hall admission to the Plastics Technology Expo (PTXPO) taking place March 17-19\, 2026\, at the Donald E. Stephens Convention Center in Rosemont\, IL\, near Chicago. \nPTXPO represents the complete plastics molding lifecycle. Everyone involved in the A-Z of molding has a seat at the table. No matter why you’re there — new clients\, partnerships\, suppliers\, or simply some fun away from home — you’ll find it at PTXPO. \nPTXPO 2026 is an unmissable opportunity to: \n\nNetwork with key industry players from across North America.\nDiscover groundbreaking applications and products shaping the future of molding and moldmaking.\nLearn cutting-edge processes and best practices to fuel your success.\n\nBe sure to stop by and visit us at our display in Booth #527 so we can personally welcome you and see how we can serve your business. \nPTXPO 2026 Exhibit Hall Hours:\nTuesday\, March 17th | 9:00am–4:00pm\nWednesday\, March 18th | 9:00am–4:00pm\nThursday\, March 19th | 9:00am–3:00pm\nRegistration is quick\, easy\, & FREE! \nClick here and use the special pre-populated code to register for your free Exhibit Hall pass!\nYou may also pass along to as many team members as you’d like!\nFor more information\, please visit: www.ptxpo.com\nWe look forward to seeing you in Rosemont!\nRegister with a FREE pass with YUSHIN here \nView our online showroom to learn more about what products we will be showcasing at PTXPO 2026! \n\nSearch our products on display\nCreate a MyPTXPO Planner to save time and organize your interests at the show. Book an appointment and save our profile to your account!\nSearch the floorplan and sessions available\nDownload the PTXPO mobile app and take your MyPTXPO planner on the go\n\nView Our ShowroomWe have new robots showcasing our capabilities\nExperience Innovation at PTXPO 2026! \nJoin us at Booth 527 for a firsthand look at the latest advancements in plastics molding technology. Discover cutting-edge solutions designed to enhance efficiency and productivity on your production floor. \nOur expert automation team will be on hand to answer your questions and help you find the right products and solutions to meet your project needs. Don’t miss this opportunity to explore innovations that can transform your molding processes! \nRC-SE Robot Series \nThe RC-SE Series is engineered for molding machines with clamping forces ranging from 30 to 1\,300 tons. Featuring Yushin’s ECO Vacuum technology\, it optimizes efficiency by reducing air consumption by up to 78% through continuous suction pressure monitoring. This innovation not only minimizes electricity usage but also lowers operational costs associated with air compressors. \nYD Robot Series \nThe new YD Series take-out robots build upon the expertise of earlier models to deliver higher productivity\, reduced downtime\, and a smaller environmental footprint. Designed for injection molding machines ranging from 30 to 1\,500 tons\, the YD Series features carbon-fiber reinforced components\, enhancing performance and durability. The use of advanced composites results in a 46% increase in flexural rigidity and a 13% reduction in single-arm vibration amplitude compared to previous models\, ensuring greater precision and efficiency. \nWEMO 12 XLine Series \nThe xDesign series is engineered for a wide range of applications\, including the molding of technical parts requiring complex automation. \nThis versatile robot series can be equipped with servo-driven rotation axes and has the capability to control external axes\, providing enhanced flexibility and precision for advanced molding processes. \nWEMO 3-5 Linear Picker \nIts compact\, space-saving design allows for seamless integration within robot guarding\, eliminating the need for additional floor-mounted safety barriers. This streamlined setup enables easier and faster installation\, optimizing workspace efficiency. \n  \n  \n  \n  \n  \n \n 
URL:https://www.yushinamerica.com/event/yushin-america-at-ptxpo-2026-rosemont-il/
LOCATION:Donald E. Stephens Convention Center\, 5555 N River Rd\, Rosemont\, IL\, 60018\, United States
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/jpeg:https://www.yushinamerica.com/wp-content/uploads/2026/01/PTXPO2026-webeventbanner-img.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260203T080000
DTEND;TZID=America/New_York:20260205T170000
DTSTAMP:20260429T030239
CREATED:20251124T213249Z
LAST-MODIFIED:20260213T144258Z
UID:8343-1770105600-1770310800@www.yushinamerica.com
SUMMARY:Yushin America at MD&M West 2026 – Anaheim\, CA
DESCRIPTION:Join us at MD&M West – Get Your FREE Expo Pass and/or 20% OFF All Conference Passes \nUse Promocode: INVITE26802 \nSave Now \nAlready Registered? \nAdd us to your My Show Planner here to ensure you come by and visit us while at the show. \nWe are excited to be partnering with Integrated Plastics Machinery\, JSW\, Novatec\, and Advantage Engineering  in BOOTH#4229 to deliver a fully functioning automation cell that will showcase our products and capabilities. Come by and watch the turn-key automation process in action! \nEvent Dates & Location\nExpo Hours:\nTuesday\, February 3\, 2026: 10 a.m.– 5 p.m.\nWednesday\, February 4\, 2026: 10 a.m.– 5 p.m.\nThursday\, February 5\, 2026: 10 a.m.– 4 p.m. \nHall E opens at 9:30 a.m. on all three days \nRegistration Hours: \nSunday\, February 1\, 2026 – 12 – 5 p.m. Hall E and Lobby A\nMonday\, February 2\, 2026 – Lobby A: 7 a.m. – 5 p.m. / Hall E: 8 a.m. – 5 p.m.\nTuesday\, February 3\, 2026 – Lobby A: 7 a.m. – 5 p.m. * conference only / Hall E: 7:30 a.m. – 5 p.m.\nWednesday\, February 4\, 2026 – Lobby A: 7 a.m. – 5 p.m. * conference only / Hall E: 8 a.m. – 5 p.m.\nThursday\, February 5\, 2026 – 8 a.m. – 4 p.m \nVenue Information: \nAnaheim Convention Center\n800 W Katella Ave\, Anaheim\, CA 92802 \nBrief description of our working cells:\nFull working Automation Demo Cell One:\nPlastic resin will be injected into a Tweezer mold in JSW’s 180-ton injection molding machine to fill and form the tweezer shape. Yushin’s high-end FRA-0515S-15-8.5-C1  high-end take-out robot and End-Of-Arm-Tool will pick up the final molded tweezers from the mold and place them on a rolling conveyor. \nWe are excited to work with our partners and suppliers at the show!\nCome see our collaboration in our booth and exhibition of fully functioning Automation cells\nOur team will be ready to answer all your questions!\n\n\nCome join us in Yushin America Booth# 4229 on February 3-5\, 2026\n\nFind us on the show floor map\n\nThere’s still time to Register online!\n\n\n\nREGISTER HERE\n\n\n\n\nUse the promo code INVITE975132 for a free expo pass and 20% off a 2-day conference pass!\n\n \n 
URL:https://www.yushinamerica.com/event/yushin-america-at-mdm-west-2026-anaheim-ca/
LOCATION:Anaheim Convention Center\, 800 W. Katella Avenue\, Anaheim\, CA\, 92802\, United States
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2025/11/MDMWest2026-webeventbanner-img.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251007T180000
DTEND;TZID=America/New_York:20251014T180000
DTSTAMP:20260429T030239
CREATED:20250922T182026Z
LAST-MODIFIED:20260417T150338Z
UID:8315-1759860000-1760464800@www.yushinamerica.com
SUMMARY:WEMO & YUSHIN at K-show 2025 - Düsseldorf\, Germany
DESCRIPTION:From 8–15 October 2025\, it’s time for K – the world’s leading trade fair for the plastics and rubber industry. If you work with injection moulding\, automation or future-focused manufacturing\, this is an event you won’t want to miss.As you step into Hall 12\, Stand F23\, you’ll be met by four fully operating automation cells. From compact setups to large-scale robotic automation\, we’re showcasing linear robots\, vision systems\, SmartDrive and synchronised motion – live. \nBut this isn’t just a tech display – you’ll get a real feel for how our solutions can integrate into your own production flow. \nWhat you’ll see at the Wemo stand: \nWemo Cell 1\nFull-scale automation\nWatch two robots work together using vision systems to sort\, package and palletise products. The product is then transported to an injection moulding machine for a complete flow demonstration – a hands-on example of downstream automation\, from camera to pallet. \n  \nWemo Cell 2\nCompact automation with SmartDrive\nWorking with limited floor space? This cell features two robots\, a conveyor and SmartDrive in a clever loop. See how to maximise output in minimal space. \n  \nWemo Cell 3\nSynchronised robots in motion\nThree robots run the exact same programme – simultaneously. A striking visual display\, but also a real-world demonstration of how to combine standard robots from small to large. It’s an area we aim to grow in – possibly with you? \n  \nYushin Cell 4\nPrecision and collaboration\nThe Yushin robot picks and sorts coloured cups with Wemo and Yushin logos. This setup highlights high precision and how our global partnership comes to life. \nWant to visit us free of charge?\nGet in touch and we’ll send you a personal registration code for free entry to K 2025.\nsales@wemogroup.com \n—————————————————————— \nBook a Meeting with Wemo at K 2025\nWant to schedule a chat with us during the fair?\nReach out to your Wemo contact – or directly to our sales team:\nsales@wemogroup.com \nFull contact details available here » \nWe look forward to seeing you in Düsseldorf! \n—————————————————————— \nWemo + Yushin = More for You \nWemo is part of the Yushin Group – a global leader in robotics for injection moulding. Together\, we offer one of the industry’s broadest product ranges\, from standardised solutions to customised automation for downstream handling\, inspection and packaging. \nAnd beyond the technology? You get local support in Europe\, Asia and North America – and a team that understands both your technical and business needs. \nFacts about K-show \n\nHeld every three years\n177\,486 visitors (2022)\n3\,020 exhibitors (2022)\n177\,516 m² exhibition space\nDates: 8–15 October 2025\nWemo: Hall 12\, Stand F23\n\n\n 
URL:https://www.yushinamerica.com/event/wemo-yushin-at-k-show-2025/
LOCATION:51.269011\, 6.727094\, D-40474 Düsseldorf\, Am Staad (Stockumer Höfe)\, Düsseldorf\, Germany
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2025/09/K-Show-2025-webeventbanner-img.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251001T080000
DTEND;TZID=America/New_York:20251003T170000
DTSTAMP:20260429T030239
CREATED:20250328T124912Z
LAST-MODIFIED:20260417T150315Z
UID:8073-1759305600-1759510800@www.yushinamerica.com
SUMMARY:MAPP Benchmarking Conference 2025 - Indianapolis\, IN
DESCRIPTION:The industry’s best Benchmarking and Best Practices Conference for processors!\nOctober 1-3\, 2025 in Indianapolis\, IN\nTakeaways\nOPERATIONAL BEST PRACTICES\nLEADERSHIP STRATEGIES\nSUPERIOR NETWORKING\nFINANCIAL BENCHMARKS \nYOU DON’T WANT TO MISS THIS EVENT! \nExcited to be a part of the MAPP Benchmarking and Best Practices Conference as an Exhibitor in the Automation Hall\, Table #53. \nWe look forward to connecting with like-minded professionals and sharing insights on future molding innovations and initiatives. \nLet’s drive innovation together! \nFind out more at www.mappinc.com/conference. \n####\n#BenchCon2025 #Leadership #Networking #Plastics \n\n 
URL:https://www.yushinamerica.com/event/mapp-benchmarking-conference-2025-indianapolis-in/
LOCATION:Indianapolis Downtown Marriott\, 350 W Maryland St\, Indianapolis\, IN\, 46225\, United States
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2025/03/2025-BC-Logo-with-theme.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250512T080000
DTEND;TZID=America/New_York:20250515T170000
DTSTAMP:20260429T030239
CREATED:20250206T213828Z
LAST-MODIFIED:20250519T183859Z
UID:7956-1747036800-1747328400@www.yushinamerica.com
SUMMARY:Yushin America at Automate Show 2025 - Detroit\, MI
DESCRIPTION:The Automate Show is the largest and most influential automation event in the Americas\, showcasing everything from robotics and AI to vision\, motion control\, and automation technologies. We’ll be there to share and demo our latest and newest automation capabilities and products! \nYou’ll also get to meet our in-house experts and uncover how the technology could help solve your challenges\, today and tomorrow. Don’t miss this invaluable opportunity to join us in Detroit\, Michigan\, May 12–15\, 2025. \n\n\nJoin us in Yushin America Booth# 2039\nFind us on the show floor map\n\n Register for FREE today!\n\nCome by and learn about our products and solutions \nthat can help with your next automation project! \nLearn more about the AUTOMATE SHOW \nYushin America\, with 50 years of automation expertise\, operates across the U.S. and Mexico\, offering 24/7/365 support and access to multiple models in stock ready for immediate shipment. The company’s recent acquisition of WEMO Automation expands its product lineup\, ensuring cutting-edge technologies that enhance operational efficiency\, reduce risks\, and maximize savings. Yushin continues to develop high-speed\, high-precision robots and custom automation solutions tailored to meet the unique needs of various industries and regions. Committed to providing ongoing support throughout the life of its equipment\, Yushin America remains a trusted leader in advanced automation solutions. \nWhat to Expect at Yushin Booth 2039\n* See Innovation in Action *\n* Experience Live Demos of our latest Technology *\n* Multi-function Solutions *\nWe are excited to see everyone. Come to Booth 2039 and see what we have in store for you! \nWe have custom-engineered systems that highlight Yushin’s capabilities and features that can match any automation project. \nYou will also have a chance to win some YUSHIN swag when you visit our booth\, 2039. Ask all about it! \nWe are excited to see everyone at the show!\n\nYushin America Booth# 2039\nFind us on the show floor map\n\nDon’t forget to add us to your My Show Planner!\nREGISTER HERE FOR FREE
URL:https://www.yushinamerica.com/event/yushin-america-at-automate-show-2025-detroit-mi/
LOCATION:Huntington Place\, 1 Washington Blvd\, Detroit\, MI\, 48226\, United States
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2025/02/AUTOMATE2025-webeventbanner-img.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250318T080000
DTEND;TZID=America/New_York:20250320T170000
DTSTAMP:20260429T030239
CREATED:20240923T184412Z
LAST-MODIFIED:20250718T124147Z
UID:7784-1742284800-1742490000@www.yushinamerica.com
SUMMARY:Yushin America at PTXPO 2025 - Rosemont\, IL
DESCRIPTION:Where Molding & Moldmaking Innovation Takes Shape\n\nJoin us in Yushin America Booth# 519\n\nFind us on the show floor map\n\nThere’s still time to Register online!\nRegister for PTXPO 2025 here\nWe are excited once again to be exhibiting at the Donald E. Stephen center for the PTXPO 2025 event! Yushin America will be in BOOTH#519 to deliver this fully functioning automation cell that will showcase our products and capabilities. Come by and learn about our products and solutions that can help with your next automation project! \nLearn more about the event here \nWe’re thrilled to offer you FREE Exhibit Hall admission to the Plastics Technology Expo (PTXPO) taking place March 18-20\, 2025\, at the Donald E. Stephens Convention Center in Rosemont\, IL\, near Chicago. \nPTXPO is your one-stop shop for everything in the molding and moldmaking industry. Explore a vast exhibit hall showcasing the latest injection molders\, mold makers\, 3D printing\, auxiliary equipment manufacturers\, materials producers\, and recycling specialists. Witness equipment demonstrations firsthand and gain valuable insights from educational sessions offered in the Discovery Workshops and Tech Talk Theaters. \nPTXPO25 is an unmissable opportunity to: \n\nNetwork with key industry players from across North America.\nDiscover groundbreaking applications and products shaping the future of molding and moldmaking.\nLearn cutting-edge processes and best practices to fuel your success.\n\nBe sure to stop by and visit us at our display in Booth #519 so we can personally welcome you and see how we can serve your business. \nPTXPO 2025 Exhibit Hall Hours \nTuesday\, March 18th\, 10:00 am – 4:00 pm \nWednesday\, March 19th\, 9:00 am – 4:00 pm \nThursday\, March 20th\, 9:00 am – 3:00 pm \nRegistration is quick\, easy\, & FREE! \n\nClick here and use the special pre-populated code to register for your free Exhibit Hall pass!\nYou may also pass along to as many team members as you’d like!\n\nFor more information\, please visit: www.ptxpo.com \nWe look forward to seeing you in Rosemont! \nRegister with YUSHIN here \nWe have new robots showcasing our capabilities\nExperience Innovation at PTXPO 2025! \nJoin us at Booth 519 for a firsthand look at the latest advancements in plastics molding technology. Discover cutting-edge solutions designed to enhance efficiency and productivity on your production floor. \nOur expert automation team will be on hand to answer your questions and help you find the right products and solutions to meet your project needs. Don’t miss this opportunity to explore innovations that can transform your molding processes! \nRC-SE Robot Series \nThe RC-SE Series is engineered for molding machines with clamping forces ranging from 30 to 1\,300 tons. Featuring Yushin’s ECO Vacuum technology\, it optimizes efficiency by reducing air consumption by up to 78% through continuous suction pressure monitoring. This innovation not only minimizes electricity usage but also lowers operational costs associated with air compressors. \nYD Robot Series \nThe new YD Series take-out robots build upon the expertise of earlier models to deliver higher productivity\, reduced downtime\, and a smaller environmental footprint. Designed for injection molding machines ranging from 30 to 1\,500 tons\, the YD Series features carbon-fiber reinforced components\, enhancing performance and durability. The use of advanced composites results in a 46% increase in flexural rigidity and a 13% reduction in single-arm vibration amplitude compared to previous models\, ensuring greater precision and efficiency. \nWEMO 12 XLine Series \nThe xDesign series is engineered for a wide range of applications\, including the molding of technical parts requiring complex automation. \nThis versatile robot series can be equipped with servo-driven rotation axes and has the capability to control external axes\, providing enhanced flexibility and precision for advanced molding processes. \nWEMO 3-5 Linear Picker \nIts compact\, space-saving design allows for seamless integration within robot guarding\, eliminating the need for additional floor-mounted safety barriers. This streamlined setup enables easier and faster installation\, optimizing workspace efficiency.
URL:https://www.yushinamerica.com/event/yushin-america-at-ptxpo-2025-rosemont-il/
LOCATION:Donald E. Stephens Convention Center\, 5555 N River Rd\, Rosemont\, IL\, 60018\, United States
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2024/09/PTXPO2025-webeventbanner-img.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250311T100000
DTEND;TZID=America/New_York:20250314T190000
DTSTAMP:20260429T030239
CREATED:20250117T203221Z
LAST-MODIFIED:20250320T172328Z
UID:7932-1741687200-1741978800@www.yushinamerica.com
SUMMARY:Plastimagen 2025 - Centro Citibanamex\, Ciudad de México
DESCRIPTION:PLASTIMAGEN® MEXICO is the biggest international exhibition for the plastics processing industry in Mexico and Latin America. This event brings together the entire production chain with top suppliers to meet the needs of various industries.\n\nYushin America Mexico Division will be exhibiting in Booth 830 and Booth 138 at Plastimagen 2025 \n \nREGISTER FOR PLASTIMAGEN HERE \nWe are excited to be exhibiting at Plastimagen 2025! \nOur knowledgeable staff is well-versed in robotic automation in the plastics industry\, and we are excited to showcase our new products at the show! \nCome check out what we have in store for you when you visit our Booth 830: \nRobot Toy Assembly System \nIn this cell\, we will utilize a YD2-3550S-19-13 Yushin robot mounted on an Arburg molding machine. This robot will take out the finished toy parts from the secondary mold. Additionally\, a SD-H-1025S-15-9 Yushin robot with an A/C servo wrist will assist in assembling the molded toy pieces together. \n  \nCome check out what we have in store for you when you visit our Booth 138: \nKendama Toy demo \nAt this booth\, the SD-H-1025S-17-12 Yushin robot\, equipped with an A/C servo wrist\, will be programmed to play with the Kendama Toy\, a traditional Japanese game. Come by and watch as our Yushin robot skillfully demonstrates its precision and accuracy while playing the Kendama. You can even test your own Kendama skills against the Yushin robot! \n     \nIf you would like to schedule a meeting with one of our Automation experts at the show\, please contact us at info@yushinmexico.com.mx. \nYou may also reach out to our  Sales Engineer\, Juan Manuel Diaz at jdiaz@yushinmexico.com.mx +52 (477) 249-0979\, OR reach out to our Mexico Sales Manager\, Vincent Bocanegra at vbocanegra@yushin.com +1 (951) 702 3735 \n\nYushin America – Mexico Division will also be around the show floor partnering with Akopet Industries at their booth (2730)\, showcasing 2 robots SD-H-1025S-15-9 both performing a simple pick&place of tupper container parts. A 170 Ton machine will be molding the container itself (one cavity) and the other one (120 Ton) will be molding on cavity of the cap. Each machine will have a MC-30-5 Yushin conveyor. \n \nWe will also be partnering with LK IMM at their booth (3414) showcasing 2 robots SD-H-2535S-19-14 and 1 HOP Five 750X equipped with 2 vac circuits and an EOAT. They will be molding Glasses for Coffee and their caps (kind of the Starbucks one). A 320 Ton machine will be molding 2 cavities of the external part of the glass\, which will need a gate cut\, performed by our robot. A 200 Ton machine will be molding 2 cavities of the internal part of the glass (simple pick & place). And a 110 Ton machine will be molding 2 cavities of the glass cap\, which will be taken out the mold by our Hop Five. The 2 biggest machines will have a MC-20-4 Yushin conveyor\, each. \n \nIf you would like to schedule a meeting with one of our Automation experts at the show\, please contact us at info@yushinmexico.com.mx. \nYou may also reach out to our  Sales Engineer\, Juan Manuel Diaz at jdiaz@yushinmexico.com.mx +52 (477) 249-0979\, OR reach out to our Mexico Sales Manager\, Vincent Bocanegra at vbocanegra@yushin.com +1 (951) 702 3735
URL:https://www.yushinamerica.com/event/plastimagen-2025-centro-citibanamex-ciudad-de-mexico/
LOCATION:IL
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2025/01/Plastimagen2025-webeventbanner-img2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250204T130000
DTEND;TZID=America/New_York:20250206T200000
DTSTAMP:20260429T030239
CREATED:20240725T012742Z
LAST-MODIFIED:20250207T190639Z
UID:7618-1738674000-1738872000@www.yushinamerica.com
SUMMARY:Yushin America at MD&M West 2025 (formerly PLASTEC WEST) - Anaheim\, CA
DESCRIPTION:The MD&M West Show is just around the corner!\nCome join us in Yushin America Booth# 4339 on February 4-6-2025\n\nFind us on the show floor map\n\nThere’s still time to Register online!\nUse the promo code 4339 for a free expo pass and 20% off a 2-day conference pass!\nREGISTER HERE\n\nWe are excited once again to be partnering with Integrated Plastics Machinery in BOOTH#4339 to deliver 2 fully functioning automation cells that will showcase our products and capabilities. Come by and watch the turn-key automation process in action!\n\n\nExpo Hours\nFebruary 4-5\, 2025: 10 AM – 5 PM \nFebruary 6\, 2025: 10 AM – 4 PM \nHall E opens at 9:30 AM daily \n\n\nRegistration Hours\nFebruary 2\, 2025: 10 AM – 5 PM \nFebruary 3-5\, 2025: 8 AM – 5 PM \nFebruary 6\, 2025: 8 AM – 4 PM \n\nLearn more about the event here \nBrief description of our working cells:\nFull working Automation Demo Cell One:\nPlastic resin will be injected into a 1 cavity Frisbee mold in Fortune’s 150-ton injection molding machine to fill and form the frisbee shape. Yushin’s high-end YDII-1025S-15-9.5 large take-out robot and single cavity End-Of-Arm-Tool will pick up the final molded frisbee from the mold and place them on a rolling conveyor. \nFull working Automation Demo Cell Two:\nPlastic resin will be injected into a 6 cavity shot glass mold in a JSW J100ADS 100-ton injection molding machine to fill and form the shape of a shot glass. Yushin’s high-end FRA-015S-15-8.5-C1 high-end take-out robot and 6 cavity End-Of-Arm-Tool will pick up the final molded shot glasses from the mold and place them on a rolling conveyor. \nWe are excited to work with our partners and suppliers at the show!\nCome see our collaboration in our booth and exhibition of fully functioning Automation cells\nOur team will be ready to answer all your questions!\n\n\nCome join us in Yushin America Booth# 4339 on February 4-6-2025\n\nFind us on the show floor map\n\nThere’s still time to Register online!\n\n\nREGISTER HERE\n\nUse the promo code INVITE975132 for a free expo pass and 20% off a 2-day conference pass!
URL:https://www.yushinamerica.com/event/yushin-america-at-mdm-west-2025-anaheim-ca/
LOCATION:Anaheim Convention Center\, 800 W. Katella Avenue\, Anaheim\, CA\, 92802\, United States
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2024/07/MDMWest2025-webeventbanner-img.png
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20241105
DTEND;VALUE=DATE:20241109
DTSTAMP:20260429T030239
CREATED:20240730T190045Z
LAST-MODIFIED:20250328T123433Z
UID:7637-1730768400-1731027599@www.yushinamerica.com
SUMMARY:Expo Plásticos 2024 - Guadalajara\, Jalisco\, México
DESCRIPTION:The event that brings together the country’s plastics sector.\n\nWith the aim of promoting the development of a strong and efficient supply chain\, Expo Plásticos 2024 is the business forum that allows you to access the latest in machinery\, technology and solutions to improve the productivity\, processes and profitability of plastic processing companies. \nYushin America Mexico Division will be co-exhibiting with Maruka MX at Expo Plasticos 2024 in Booth number 908. \n \n\n   \n\n\n\n\nThe event that brings together the country’s plastics sector\n \n\nWe are excited to be exhibiting at Expo Plasticos 2024! Our knowledgeable staff are widely versed in robotic automation in the plastics industry and we are excited to showcase the new products we have at the show! \n \nCome check out what we have in store for you when you visit our partnered booth 908: \nWorking Cell #1: Robot Toy Assembly System \nSimilar to the application being done at EXPO POLIPLAST\, here we will utilize the a YD2-3550S-19-13 robot to takeout the mold from the secondary mold and a SD-H-1025S-17-12 robot with A/C servo wrist will be used to help assembly the robot molded pieces together. \nWorking Cell #2: Pick and Place application with inspection vision camera \nSD-H-1025S-15-9 robot with A/C servo wrist will be mounted on a Maruka FCS molding machine. The Yushin robot will be programmed to do a simple Pick and Place application molded casing parts\, and placing the finished parts on a conveyor. \n \nDon’t forget to also check out the Akopet booth 2001: \nWorking Cell: Simple Pick and Place \nSD-H-1025D-15-9-9.5 Simple Pick & Place. Conveyor MC-30-5 Simple Pick & Place \nIf you would like to schedule a meeting with one of our Automation experts at the show\, please contact us at info@yushinmexico.com.mx. \nYou may also reach out to our Regional Sales Engineer\, Vincent Bocanegra at vbocanegra@yushinmexico.com.mx
URL:https://www.yushinamerica.com/event/expo-plasticos-2024-guadalajara-jalisco-mexico/
LOCATION:Expo Guadalajara\, Av. Mariano Otero # 1499\, Colonia Verde Valle Zona Plaza Del Sol\, Guadalajara\, Jalisco Cp\, Mexico
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/webp:https://www.yushinamerica.com/wp-content/uploads/2024/07/ExpoPlasticos2024-webeventbanner-img.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20241002
DTEND;VALUE=DATE:20241005
DTSTAMP:20260429T030239
CREATED:20240725T015126Z
LAST-MODIFIED:20241011T185636Z
UID:7622-1727827200-1728086399@www.yushinamerica.com
SUMMARY:MAPP Benchmarking Conference 2024 - Indianapolis\, IN
DESCRIPTION:The industry’s best Benchmarking and Best Practices Conference for processors!\nOctober 2-4\, 2024 in Indianapolis\, IN\nTakeaways\nOPERATIONAL BEST PRACTICES\nLEADERSHIP STRATEGIES\nSUPERIOR NETWORKING\nFINANCIAL BENCHMARKS \nYOU DON’T WANT TO MISS THIS EVENT! \n \n \nYushin America will be sponsoring the event and will have a spot in the Automation Hall to support our customers with any questions and projects they may need assistance with. We will be in Table 59! Stop by and say Hi! \nDan Aikin will be ready to answer any questions or find solutions to your automation projects. No matter how small or large your automation\, Yushin America can surely match solutions to your downstream automation. \nSend us your photos and videos of your automation and we will be prepared to provide your options and solutions to efficiently and implement the right automation for your company. \nFeel free to reach out to us and schedule a one on one meeting at the benchmarking conference at Salesinfo@yushin.com | daikin@yushin.com | cparrillo@yushin.com | or call us at (401) 463-1800 \n \n \n \nChris Parrillo – National Sales Manager and co presenter – Kyle Barry from Engineering Industries will be speaking at the Benchmarking Conference \nDate/Time:  October 3rd at 11:15AM Eastern \nLocation: Room W3 \nChoosing the Right Projects to Automate\, and Strategies to Successful Implementation \nAs the demand for robots and automation increases\, it is important for organizations to target projects that make sense for their process and have a chance for success in their facility. There are some best practices when it comes to selecting a project or process to automate that will help the organization achieve successful integration. Automation or robotics projects that are targeted should make sense for the company based on factors such as cost benefits\, internal competencies\, level of complexity\, and life of the project. The presentation will cover some of the factors to determine which projects to target and which may not make sense.  I will also review some examples of automation projects that made blatant sense to automate as well as some projects that should not have been targeted for automation.
URL:https://www.yushinamerica.com/event/mapp-benchmarking-conference-2024-oct-2-4-indianapolis-in/
LOCATION:Indianapolis Downtown Marriott\, 350 W Maryland St\, Indianapolis\, IN\, 46225\, United States
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/webp:https://www.yushinamerica.com/wp-content/uploads/2024/07/2024-BC-Logo-with-theme.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20240814
DTEND;VALUE=DATE:20240818
DTSTAMP:20260429T030239
CREATED:20240730T182321Z
LAST-MODIFIED:20241011T185708Z
UID:7626-1723600800-1723859999@www.yushinamerica.com
SUMMARY:Expo Poliplast 2024\, Aug. 14-16\, Cintermex\, Nuevo León\, México
DESCRIPTION:Its objective is to bring together the largest companies in the plastics industry at national and international level\, to expand and create commercial alliances\, as well as to present the latest innovation in supplying materials\, equipment\, machinery and services for the industry. \nYushin America Mexico Division will be exhibiting at Expo Poliplast 2024 in Booth number 400. \n\n\n\n\nLeading event for the plastics industry in the north of the country\n \n\nWe are excited to be exhibiting at Expo Poliplast 2024! Our knowledgeable staff are widely versed in robotic automation in the plastics industry and we are excited to showcase the new products we have at the show! \n \nCome check out what we have in store for you when you visit our booth: \nWorking Cell #1: Robot Toy \nIt’ll be mounted on an FCS – CT 180e machine. The robot will be the FRA-3060DS that was used at NPE show. \nDemo Cell #2: Kendama Toy \nYushin robot SD-H-1025S with servo wrist A/C will be playing with the Kendama Toy. \nDemo Cell #3: Stocker Cell \n Yushin robot SD-H-2535S with servo wrist A/C will be stacking pens on a tray. The tray will be placed on a Yushin Stocker ACS-K5-F. Once the tray is full\, it will be moved to the edge of the stocker and replaced by a new one. The full one will be emptied by a Yushin Robot SD-H-0310S. All the pens will be placed on a conveyor one by one. Once the tray is empty\, the main robot will do an automatic tool change and will move the empty tray to the waiting position. \n \nIf you would like to schedule a meeting with one of our Automation experts at the show\, please contact us at info@yushinmexico.com.mx. \nYou may also reach out to our Regional Sales Engineer\, Vincent Bocanegra at vbocanegra@yushinmexico.com.mx
URL:https://www.yushinamerica.com/event/expo-poliplast-2024-aug-14-16-cintermex-leon-guanajuato-mexico/
LOCATION:Cintermex\, Av. Conscripto 311\, Col. Lomas de Sotelo\, Ciudad de Mexico\, 11200\, Mexico
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/webp:https://www.yushinamerica.com/wp-content/uploads/2024/07/ExpoPoliplast2024-webeventbanner-img.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240506T090000
DTEND;TZID=America/New_York:20240510T170000
DTSTAMP:20260429T030239
CREATED:20240502T214551Z
LAST-MODIFIED:20241011T185512Z
UID:7301-1714986000-1715360400@www.yushinamerica.com
SUMMARY:NPE2024 - National Plastics Expo - Orlando\, FL - May 6 - 10\, 2024
DESCRIPTION:Yushin Boasts Its Largest Ever NPE Presence\nMore Yushin robots are taking on more tasks than ever before at the triennial show\, with premieres for the newest large model the MKA along with the new RC-SE and YD Series. \n\nYushin Exhibits once again at the National Plastics Exposition \nafter cancelling during the pandemic in 2021\nYushin is excited and proud to announce their plans for NPE2024. Attendees will expect to see so much more automation and downstream equipment running in our booth than the last NPE show in 2018. The company will present more running work cells showing innovative applications of the operating robots than ever before – in the Yushin booth as well as throughout the show hall. The 2018 booth highlighted the markets that are served with the broad Yushin product line and introduced Smart Manufacturing. This year\, the focus is on sustainability and innovation\, as well as adapting to the specific needs of the attendee. \n\n\nJoin us Yushin America at NPE2024 in Booth# 3369\n\nFind us on the show floor map\nDon’t forget to add us to your My Show Planner\n\nThere’s still time to Register online!\nUse the promo code 4052 for a free expo pass!\nREGISTER HERE\n\n\n\n\n\n\nThis center highlight at the show\nThe all-new MKA Large robot will demonstrate the end-of-arm tooling exchange with Yushin’s patented end of arm tooling quick change plates and equipped with a 3-axis ABC servo wrist. The MKA-2000S features a 3-axis cartesian style traverse robot with a movable kick beam and a 2-stage telescopic vertical arm. The MKA-2000S robot works on machines of 1500 molding tons and larger. Suitable for the Automotive\, Appliance and Industrial industries. Attendees will be able to get a safe and unrestrictive view of Yushin’s newest large robot model in action. \nAn optional servo 3-axis ABC servo wrist unit enables precision control and motion comparable to a 6-axis articulated arm robot. Compared to predecessor models like the RBII-2500S\, Yushin says MKA-2000S has 17% faster take-out times. Vibration damping during movement and stopping further shortens cycle times by 10%. Meanwhile\, the MKA’s low-profile design enables low-overhead-clearance work envelopes and a reduced overall footprint. \nYushin is also introducing the new RC-SE Series take-out robots with low air consumption. The RC-SE Series targets molding machines with clamping forces between 30 and 1\,300 tons\, and its use of Yushin’s ECO Vacuum technology for reduced air consumption enables up to a 78% reduction in air consumption via constant suction-pressure monitoring. In addition to reduced electricity consumption\, equipment costs related to air compressors can go down. \nLong Life Mode automatically adjusts the take-out robot drive speed according to the molding cycle\, reducing the amount of power being used by 5% according to Yushin’s in-house testing. This also extends the guide shaft’s and timing belt’s service lives. As with Yushin’s flagship FRA series\, the RC-SE optimizes vibration control on all axes while applying predictive maintenance to minimize downtime. \nThe RC-SE model series will be running on three presses throughout the show floor\, with a RC2-1525S-22-11-SE in Yushin’s booth operating on a Niigata MDVR85S8000 vertical injection molding machine molding battery canisters\, while a RC2-2535S-15-13-SE robot will be on a Sumitomo SE180EVA machine molding a sip-and-grip handle (learn more below). \nIn the Niigata cell\, a Yushin robot will work together with molding a two-cavity PP battery canister. The Yushin RC2-1525S-22-11-SE robot will place inserts into the mold and remove the finished product\, while a 6-axis ABB robot locates the inserts using the Wemo Pic Vision System with vibration feeder\, W-PVS-VF2. A Doosan co-bot will be used to trim the parts and place them onto a Yushin conveyor. \nThe new YD series of take-out robots leverages knowledge gained from earlier versions for a range promising higher productivity\, less downtime and a smaller environmental footprint. The YD series targets injection molding machines ranging in size from 30 to 1500 tons and features carbon-fiber reinforced parts. Application of advanced composites results in a 46% improvement in flexural rigidity and 13% reduction in single-arm vibration amplitude\, compared to previous models. \nYushin says the design optimization engineering\, carbon-fiber components and standard vibration-damping controls result in faster settling times. The structure has been optimized lower weight and natural oscillation\, while increasing rigidity. The take-out diagnosis and predictive maintenance functions greatly prevent downtime\, while the E-touch compact 3 controller adds several assist features to the previous YC series controller. Specifically\, the cycle-up function\, manual torque monitoring and all-axis manual operation screens have all been added to the robot’s teaching capabilities. The YD model series will be running on six presses across the show floor. A YD-0310S-14-7 will be in Yushin’s booth\, floor mounted working on a LS Mtron theOne120E injection molding machine molding a 4-oz. airline cup. \nYushin latest and newest acquisition\, WEMO Automation will be featuring WEMO’s x120 XLine series showing the relative ease of programming using the company’s W-HP12 Wemo Intuitive Programming Software (WIPS) 4.0 program. \n \n\n     We are excited to work with our partners and suppliers at the show!\nCome see our collaboration in our booth and exhibition of fully functioning Automation cells\nOur team will be ready to answer all your questions!\n\nYushin America Booth# 3369\n\nWe will also be all around the show floor\, don’t forget to check us out in:\nFortune International Booth W981\nSumitomo Booth 3343\nJapan Steel Works (JSW) Booth W1561 \nLS IMM USA\, LLC Booth W1101 \nNissei America Booth W2401\nSodick by Plustech Booth W3581\nShibaura Machine Company\, America Booth W2743\nPlastrac\, Inc. Booth W4001\nNiigata Machine Techno Inc. USA Booth W4161 \nBoy Machines Booth W2101 \nMatsui America Inc Booth W743 \n\nFind us on the show floor map\nDon’t forget to add us to your My Show Planner\nREGISTER HERE\nClaim your free guest pass using our code: 4052 
URL:https://www.yushinamerica.com/event/npe2024-national-plastics-expo-orlando-fl-may-6-10-2024/
LOCATION:Orange County Convention Center (OCCC)\, 9800 International Drive\, Orlando\, FL\, 32819\, United States
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2024/05/NPE2024-banner-img.png
ORGANIZER;CN="Plastics Industry Association":MAILTO:plastics@plasticsindustry.org
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20240206
DTEND;VALUE=DATE:20240209
DTSTAMP:20260429T030239
CREATED:20240130T222425Z
LAST-MODIFIED:20241011T185819Z
UID:7506-1707188400-1707361199@www.yushinamerica.com
SUMMARY:Yushin America at PLASTEC WEST 2024 - Anaheim\, CA
DESCRIPTION:The Plastec West Show is coming up soon!\nJoin us in Yushin America Booth# 3928\n\nFind us on the show floor map\nDon’t forget to add us to your My Show Planner\n\nThere’s still time to Register online!\nUse the promo code 3928 for a free expo pass and 20% off a 2-day conference pass!\nREGISTER HERE\n\n\nCome check out our YD series robot running in our booth!\n\n\nWe are excited once again to be partnering with Integrated Plastics Machinery in BOOTH#3945 to deliver this fully functioning automation cell that will showcase our products and capabilities. Come by and watch the turn-key automation process in action! \nLearn more about the event here \n\n\n\nBrief description of our working cells:\nAutomation Cell One\nPlastic resin will be injected into a 1 cavity Frisbee mold in Fortune’s 150-ton injection molding machine to fill and form the frisbee shape. Yushin’s high-end YDII-1025S large take-out robot and single cavity End-Of-Arm-Tool will pick up the final molded frisbee from the mold and place them on a rolling conveyor. There will also be an OB7 collaborative robot waiting at the end to stack the frisbees on a table. \nAutomation Cell Two\nPlastic resin will be injected into a 2 cavity enclosure container in a JSW 150-ton injection molding machine to fill and form the an enclosure clam case. Yushin’s high-end YDII-1025S large take-out robot and 2 cavity End-Of-Arm-Tool will pick up the final molded container from the mold and place them on a rolling conveyor. \nWe are excited to work with our partners and suppliers at the show!\nCome see our collaboration in our booth and exhibition of fully functioning Automation cells\nOur team will be ready to answer all your questions!\n\nYushin America Booth# 3945\nWe will also be in Sumitomo Booth#3920\n\nFind us on the show floor map\nDon’t forget to add us to your My Show Planner\nREGISTER HERE\nUse the promo code 3928 for a free expo pass and 20% off a 2-day conference pass
URL:https://www.yushinamerica.com/event/yushin-america-at-plastec-west-2024-anaheim-ca/
LOCATION:Anaheim Convention Center\, 800 W. Katella Avenue\, Anaheim\, CA\, 92802\, United States
CATEGORIES:Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2024/01/PlastecWest2024-webeventbanner-img.png
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20231004
DTEND;VALUE=DATE:20231007
DTSTAMP:20260429T030239
CREATED:20231002T152738Z
LAST-MODIFIED:20231002T180335Z
UID:7464-1696377600-1696636799@www.yushinamerica.com
SUMMARY:MAPP Benchmarking Conference 2023 - Oct. 4-6 - Indianapolis\, IN
DESCRIPTION:The industry’s best Benchmarking and Best Practices Conference for processors!\nOctober 4-6\, 2023 in Indianapolis\, IN\nTakeaways\nOPERATIONAL BEST PRACTICES\nLEADERSHIP STRATEGIES\nSUPERIOR NETWORKING\nFINANCIAL BENCHMARKS \nYOU DON’T WANT TO MISS THIS EVENT! \nCome Visit us at Booth#50 in the AUTOMATION HALL! \nOur Team will have an OB7 Co-bot demo in our booth to showcase its abilities to perform multiple automation tasks.
URL:https://www.yushinamerica.com/event/mapp-benchmarking-conference-2023-oct-4-6-indianapolis-in/
LOCATION:Indianapolis Downtown Marriott\, 350 W Maryland St\, Indianapolis\, IN\, 46225\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2023/10/2023-Benchmark-Conf-logo-horizontal.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230908T000000
DTEND;TZID=America/New_York:20230908T000000
DTSTAMP:20260429T030239
CREATED:20230908T132046Z
LAST-MODIFIED:20230922T125702Z
UID:7456-1694131200-1694131200@www.yushinamerica.com
SUMMARY:Injection Molding & Design Expo 2023
DESCRIPTION:Yushin America will be exhibiting at the Injection Molding & Design Expo 2023 event in table booth #807. Come stop by and learn about what Yushin can do to help with your automation needs. \nHave a question about robotics and automating your projects? We will have a Yushin representative ready to answer your questions on the show floor. If you would like to schedule a meeting with one of our representatives\, book an appointment with us by sending us your contact information\, time and date through Salesinfo@yushin.com. We will confirm meeting times ahead of time before the event. \n \nKent Leininger will also be speaking at the conference on the topic:\nChoosing the right projects to automate\n\nThe Home For the North American Injection Molding Industry\n\n\nThe Injection Molding and Design expo is a free-to-attend tradeshow from the people behind Plastics News and Injection World magazines. Focused exclusively on injection molding\, the two-day event brings together the complete North American supply chain\, from part and mold design\, through process optimization and automation\, to finishing and assembly. \nThis trade show brings the injection molding community together to identify new opportunities and learn about the technologies\, materials and equipment that will drive this industry forward. We all share common goals: making better parts at lower costs\, while meeting global sustainability demands. \n\nREGISTER here \nOur Guests can receive 20% off the registration fee if you enter the code SPEAK20. \nHotel & Travel Information \nCome Visit YUSHIN AMERICA Booth #807! 
URL:https://www.yushinamerica.com/event/injection-molding-design-expo-2023/
LOCATION:IL
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/jpeg:https://www.yushinamerica.com/wp-content/uploads/2023/09/imd_expo_social_media_banners_exhibitor.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20230829
DTEND;VALUE=DATE:20230831
DTSTAMP:20260429T030239
CREATED:20230828T135523Z
LAST-MODIFIED:20230922T125734Z
UID:7443-1693267200-1693439999@www.yushinamerica.com
SUMMARY:Molding 2023 - Minneapolis\, MN
DESCRIPTION:Yushin America will be exhibiting at the Molding Conference 2023 event in table booth #3 . Yushin America will be exhibiting in a 10×10 tabletop linear exhibit. Come stop by and learn about what Yushin can do to help with your automation needs. \nHave a question about robotics and automating your projects? We will have a Yushin representative ready to answer your questions on the show floor. If you would like to schedule a meeting with one of our representatives\, book an appointment with us by sending us your contact information\, time and date through Salesinfo@yushin.com. We will confirm meeting times ahead of time before the event. \n \nChris Parrillo will also be speaking at the conference on the topic:\nChoosing the right projects to automate\nTuesday\, August 30 • 10:00 AM – 10:30 AM\nCheck out other session topics at the conference here \n\nConnecting Leaders in Injection Molding​\n\n\nMolding 2023’s educational conference and exhibits are where industry leaders meet and discuss the latest developments in various molding processes\, equipment\, materials and management techniques\, with special emphasis on adding value to your business. This conference is widely recognized as the most important forum for technical information and business conditions ​in injection molding. \n\nREGISTER here \nOur Guests can receive 20% off the registration fee if you enter the code SPEAK20. \nHotel & Travel Information \nCome Visit YUSHIN AMERICA booth on Table #3! 
URL:https://www.yushinamerica.com/event/molding-2023-minneapolis-mn/
LOCATION:Hyatt Regency Minneapolis\, 1300 Nicollet Mall\, Minneapolis\, MN\, 612-370-1234\, United States
CATEGORIES:Event,Past Events
ATTACH;FMTTYPE=image/png:https://www.yushinamerica.com/wp-content/uploads/2021/04/MoldMakingConference2023banner-e1693314991283.png
END:VEVENT
END:VCALENDAR