Contact

Info

Yushin
University
  • Demonstration Stock

    Discount prices on showroom and overstocked models

    Yushin provides equipment to universities and other training facilities for their use in educating their attendees.  To maintain current models, this stock is rotated with newer products.  Those lightly used demonstrators are then sold at a reduced price.  Additionally, robots and accessory products are also displayed at trade shows (such as NPE 2018.  They are also discounted and sold as used equipment even though they may have only 50 to 60 hours of run-time.

    Below is a list of those items that are currently available.  Please be aware that they are available on a “first PO gets it” basis.  The list changes frequently, so be sure to check back often.

    ROBOTS

    model  -  discharge direction  -  SPI  -  options

    HSA-150S-17-85 EII  -  rear side 
    RCII-400DS-17-11-11  -  rear side  -  32-pin  -  none
    SVR-C50 insert style  -  LH  -  50-pin  -  4 pressure circuits 3 vacuum circuits total
    RCII-250DW-21-21-9.5-9.5-9.5-M-MM

    *please call (401) 463-1800 for model availability or email us at SalesInfo@yushin.com


    NPE2018 Models SPI Discharge Direction Options
    CTII-250DS-35-9.5-9.5 32-pin Clamp Addt'l vacuum, addt'l pressure circuit on both arms
    FRA-0515S-17-8.5-CV2 50-pin rear (1) 4mm single solenoid, (1) addt'l vacuum w/o blowback
    FRA-1530S-17-11-CV2 50-pin rear (2) Eco-vac w/blowback, (2) pressure, (1) sprue
    FRA-1530S-17-11-C2V 50-pin rear conv options
    FRA-3060S-19-13-CV2 50-pin operator (2) Eco-vac w/blowback, (2) pressure circuits
    FRA-3060S-22-13-C2V 50-pin rear conv (3) Eco-vac w/o blowback, (2) pressure, (1) sprue, 500mm traverse offset, center off valve
    HST-150S-15-8.5-EII 50-pin rear conv Blowback
    RCII-250S-25-13 50-pin operator Payload up, (3) 6mm da. Ss. valve, 10 connector cable, 600mm traverse offset, rotary valve
    YC-30-9-5.5 50-pin rear blowoff
    YCII-150S-15-95 32-pin rear n/a
    YCII-150S-17-95 32-pin rear n/a
    YCII-150D-15-9.5-9.5 32-pin rear no options

     

    FLAT BELT CONVEYORS

    belt width  -  length  -  height  -  options
    300 mm  -  2500 mm  -  1220 mm  -  index and drop zone clear
    400 mm  -  2000 mm  -  1200 mm  -  index   (currently at PTW2016)  
    400 mm  -  2500 mm  -  1400 mm  -  index   (currently at PTW2016)
    400 mm  -  2500 mm  -  1400 mm  -  index 
    600 mm  -  2500 mm  -  1525 mm  -  index 
    600 mm  -  2500 mm  -  1200 mm  -  index 

    *please call (401) 463-1800 for model availability or email us at SalesInfo@yushin.com


    SAFETY GUARDING PANELS

    qty  -  type  -  width  -  height  -  insert  -  notes
    5  -  standard  -  12"  -  84"  -  polycarb
    4  -  standard  -  18"  -  84"  -  polycarb
    2  -  standard  -  24"  -  84"  -  polycarb
    1  -  standard  -  27"  -  84"  -  polycarb 
    1  -  standard  -  28"  -  84"  -  polycarb
    2  -  standard  -  30"  -  84"  -  polycarb
    1  -  standard  -  32"  -  84"  -  polycarb
    2  -  standard  -  36"  -  84"  -  polycarb 
    1  -  standard  -  40"  -  84"  -  polycarb
    6  -  standard  -  48"  -  84"  -  polycarb 

    1  -  hinged door  -  30"  -  84"  -  polycarb  -  right hinge
    4  -  hinged door  -  36"  -  84"  -  polycarb  -  right hinge
    2  -  hinged door  -  36"  -  84"  -  polycarb  -  left hinge

    2  -  conveyor pass-thru  -  24"  -  84"  -  polycarb  -  opening = 41.75" high
    1  -  conveyor pass-thru  -  24"  -  84"  -  polycarb  -  opening = 58" high
    1  -  conveyor pass-thru  -  32"  -  84"  -  polycarb  -  opening = 52" high
    1  -  conveyor pass-thru  -  36"  -  84"  -  polycarb  -  opening = 48" high
    1  -  conveyor pass-thru  -  40"  -  84"  -  polycarb  -  opening = 52" high
    1  -  conveyor pass-thru  -  48"  -  84"  -  polycarb  -  opening = 44" high
    1  -  conveyor pass-thru  -  48"  -  84"  -  polycarb  -  opening = 52" high
    1  -  conveyor pass-thru  -  48"  -  84"  -  polycarb  -  opening = 55" high
    1  -  conveyor pass-thru  -  48"  -  84"  -  black mesh  -  opening = 49" high
    1  -  conveyor pass-thru  -  48"  -  84"  -  black mesh  -  opening = 54" high

    *please call (401) 463-1800 for model availability or email us at SalesInfo@yushin.com


    Info

    Contact