High-Speed Take-out Robots

HST

High-Speed Take-out Robots

Improved productivity via high speed + vibration control

HST robots bring to the table the tools and means for improving productivity in the form of high-speed operation and thorough vibration controls. Higher speeds have been achieved by employing Optimum Design approach to reduce the mass of moving parts, while the enhanced vibration dampening of the CFRP arm combines with anti-vibration measures to shorten settling time.

Joint research with Kyoto University Optimum Design is what Yushin calls its use of CAE (Computer-Aided Engineering) to determine the theoretically best configuration of a robot based on its mechanisms and movements. This approach has been used in recent years to make aircraft and automobiles lighter and more reliable. Through joint research conducted with Kyoto University, Yushin first tested and applied CAE to an EOAT. Following the good results, this Optimum Design approach was employed with take-out robots of the HSA, TSXA, YC and HST series.

Clamping force
30-500 tf500-1,500 tf
Max payload
Less than 5 kg5-15 kg15-35 kg
Application
Taking Out Products + SpruesTaking Out ProductsTaking Out Products + Products
Find a salesperson

Overview

Optimum Design

Winner of the JSME Technology Award

Great reviews in engineering circles In 2011, Yushin was honored with the prestigious Technology Award of the Japan Society of Mechanical Engineers (JSME) for "developing high-performance take-out robots for molding machines by structural optimization".

Features

Shorter settling time via Optimum Design + CFRP + vibration controls

In developing the HST series, Optimum Design approach was also employed to analyze specific frequency and vibration dampening characteristics. As a result, vibration attenuating performance was greatly improved in the form of a 98.6% reduction in settling time (time required for vibrations to fall below a desired level).

Shorter set times of timers

The major reduction in settling time makes it possible to shorten the various timers that monitor individual take-out robot steps, which together add up to shorter cycles in actual molding production.

Stable take-out

Because minimal vibrations occur during robot motions and stopping, and the enhanced dampening performance quickly quells whatever oscillations are generated, therefore HST robots stably can take out precision molded parts and small delicate parts at high speeds.

Design

Lighter weight for faster speeds

With the HST series, design optimization has been individually applied to the structure and configuration of structural and moving parts to reduce body weight. As a result, moving parts have been reduced in weight by approximately 72.5 kg, making the HST robots 25.4% lighter than predecessor models. The lower weight has directly translated into increased speeds of 9.2% over earlier robots without using higher duty drive motors. Moreover, design optimization not only has reduced robot weight but also "ensured the high rigidity needed to capitalize on that weight reduction".

Compatible controllers

E-touch compact-YC

E-touch II

Compatible Yushin controller
Compatible Yushin controller
Compatible Yushin controller

Series lineup

HST series model
HST series model
HST series model

Get a quote on the HST.

Share your molding machine, part and cycle target. A Yushin specialist will confirm the right model and options for your cell.

Sales(401) 463-1800
24/7 service hotline(888) 70-ROBOT
Emailsalesinfo@yushin.com
North American headquarters35 Kenney Drive, Cranston, RI 02920
Request a quote

Molding application survey

Tap what fits and skip anything you're not sure of. A Yushin specialist will take it from there.

Step 1 of 3

Your molding machine

Molding machine size (tonnage)
Number of cavities
Molding cycle time