Options and accessories.
Servo wrists, quick-change units, nippers and sprue cutters that extend what your Yushin robot can do.

Additional functions and features.
All Yushin robots come with an optional list of equipment. Most options are available for the RC/RCII, RBII/YC/YCII/YAII, FRA and CT/CT2 series.

EOAT one-touch quick-release fitting
Quick and easy manual attachment and detachment of the end-of-arm tool.

Pneumatic A-axis wrist unit
Designed by Yushin America. Swings the EOAT horizontally to change the direction of molded products when they are released.

NC nipper unit
Trims molded parts from a variety of angles without re-positioning the part. Servo nipper motions are taught and saved through the robot controller.

External beam-mounted nipper unit
Mounts under the end of the traverse beam with no floor stand, with conventional nippers or heated gate cutters. Saves floorspace.

EOAT sprue/gate cut unit
Nippers on board the EOAT cut gates and sprues while the tool grips the parts, with minimal impact on cycle time.

EOAT quick-change unit
Instant attachment and detachment of wiring and tubing when changing the EOAT, with a check valve that prevents air leaks. Manual or automatic.
NC servo wrist units.
Up to 3 servo-powered axes (wrist flip, vertical rotation and horizontal rotation) freely rotate and angle the EOAT and orient payloads before release, handling inserts and molded products with the same freedom as articulated robots.
Available in 2-axis and 3-axis configurations, each unit is teach-and-save programmable through the robot's controller, so repeat setups and mold changes stay fast and consistent.




Easily handle different parts with simple teaching
Position changes are completed by selecting the saved program, especially effective for gate and sprue cutting.

Easy removal of parts from complex molds
Position the EOAT at the ideal angle for molds with undercuts, with smooth, repeatable part removal.

Flexible handling for complex products
Adjust orientation and release angle, and separate right- and left-hand parts to prevent mix-ups.

Simpler inspection, cutting and secondary processes
Position parts accurately for vision inspection and trimming without extra equipment.
EOAT quick-change units for every robot size.
Changeover time can be drastically shortened by quick connection and release. New quick-change units need a dedicated program for EOAT exchange or a robot modification; ask your Yushin sales representative.

Small / low payload

Medium payload

Large / high payload
More solutions
Systems & Applications
Full factory automation, downstream cells, conveyors and guarding
Learn moreEnd-of-Arm Tooling
Insert molding, IML and custom EOAT designed in-house
Learn moreControllers & Software
E-touch controllers and Yushin software
Learn moreINTU LINE IoT
Monitor production status anywhere, anytime
Learn moreWhat does uptime look like for you?
Tell us about your molding cell and a Yushin specialist will help you match the right robot, tooling and support to your production.
