




YD2 Series
Large Take-out Robots
Enhanced design for higher productivity, less downtime, and lighter environment footprint.
For reliable take-out of very large molded products such as automobile parts, housing equipment parts and other large molded articles from ultra-large molding machines. With its high mechanical rigidity, it stably takes out heavy articles. The YD2 Large series come with the easy-to-use E-touch compact controller as a standard feature. It is a standard take-out robot of great cost-performance.
46% Better Flexural Rigidity Than Previous Model, and 13% Reduction in Vibration Amplitude
- Clamping force
- 800-1,000 tf1,000-1,300 tf
- Max payload
- 35 kg or greater40-50 kg
- Application
- Taking Out ProductsTaking Out in Sync With Upstream/Downstream ProcessesTaking Out Products + Products
Overview
Productivity Enhancements
YD series robots utilize parts constructed of CFRPv3(*) and gained 46% improvement in flexural rigidity as well as a 13% reduction in single-arm vibration amplitude, compared to previous models. Stable operation with less vibration helps raise productivity by preventing scratches or damage to products during take-out, and reducing the occurrence of take-out failures.
(*): Third generation Carbon Fiber Reinforced Polymer that outperforms the CFRP used in previous YC series robots.
Teaching Enhancements
- Cycle-Up function (PAT.P) - This feature displays required times per robot operation in a step-by-step list. This aid helps operators identify and target areas of the sequence to achieve shorter overall cycle times and raise productivity.
- Manual Torque Monitor - Displays a torque gauge for each axis during robot teaching, to show operator how much load the robot bears in motion. This aid allows operators to observe slight fluctuations in torque and fine-tune difficult-to-teach programs, like for insert molding.
- All-axis Manual Operation screen - Operators can see and control all axes on just a single screen, enhancing operability.
- Highly Operable E-touch Compact3 - The E-touch compact3 takes the easy operability of the previous YC series controller and adds several assist features to become even easier to use.
Downtime-Preventing Enhancements
The robot automatically monitors vacuum pressure during take-out operations to identify patterns and assist in finding causes of take-out failures. Each vacuum circuit is monitored individually to more quickly find abnormal circuits. The robot records the frequency of take-out failures, so operators can more easily recognize when maintenance is needed, or more easily find causes after trouble occurs. Diagnosis results are displayed on the Take-Out Failure Details screen, where operators can see vacuum pressure values and bad take-out patterns that have occurred.
Productivity Enhancements
Utilizing CFRPv3
YD series robots utilize parts constructed of CFRPv3(*) and gained 46% improvement in flexural rigidity as well as a 13% reduction in single-arm vibration amplitude, compared to previous models. Stable operation with less vibration helps raise productivity by preventing scratches or damage to products during take-out, and reducing the occurrence of take-out failures.
All-axis Optimized Vibration Control
Our Design Optimization engineering plus CFRPv3 components and vibration-damping controls result in faster settling times.
Teaching Enhancements
Cycle-Up Function
This feature displays required times per robot operation in a step-by-step list. This aid helps operators identify and target areas of the sequence to achieve shorter overall cycle times and raise productivity.
Manual Torque Monitor
Displays a torque gauge of each axis during robot teaching, to show operator how much load the robot bears in motion. This aid allows operators to observe slight fluctuations in torque and fine-tune difficult-t0-teach programs, like for insert molding.
All-Axis Manual Operation Screen
Operators can see and control all axes on just a single screen, enhancing operability.
Downtime Preventing Enhancements
Take-out Diagnosis Function
The robot automatically monitors vacuum pressure during take-out operations to identify patterns and assist in finding causes of take-out failures. Each vacuum circuit is monitored individually to more quickly find abnormal circuits. The robot records the frequency of take-out failures, so operators can more easily fid caused after trouble occurs. Diagnosis results are displayed on the Take-Out Failure Details screen, where operators can see vacuum pressure values and bad take-out patterns that have occurred.
Predictive Maintenance
Continuously monitors robot during operation and alerts operator with a message if potential trouble symptoms are detected. This feature elevates maintenance from preventative to predictive.
Items that can be detected:
- Motor overload warning
- Battery voltage drop
- Regenerative overload warning
- Motor temperature rise
Compatible controllers
Highly Operable E-touch Compact3 Controller
The E-touch compact3 takes the easy operability of the previous YC series controller and adds several assist features to become even easier to use.
E-touch Compact3
Series lineup



Get a quote on the YD2 Series.
Share your molding machine, part and cycle target. A Yushin specialist will confirm the right model and options for your cell.



