


SVR-C50
Take-out Robot for Vertical Molding Machine
High-speed robot for inserting workpiece and taking-out molded part operations alongside vertical molding machines
With servo motors driving all (vertical and traverse) axis, both molded part taking-out and insert placing operations for vertical molding machines are fast and precise. Moreover, the compact design takes up less space.
Applicable for insert molding, molded part take-out and runner take-out Good rigidity and high-speed operation enable use in high-precision, high-cycling molding.
- Clamping force
- 30 tf or less30-500 tf
- Max payload
- Less than 5 kg
- Application
- Taking Out ProductsTaking Out Just Sprues
Overview
Triple job support from 2 types
Insert system type Applicable to insert molding and molded part take-out Applicable IMMs with clamping force: up to 50 ft (Support up to 150 ft in molded part take-out)
Runner take-out type Applicable to high-speed runner take-out Applicable IMMs with clamping force: up to 50 ft
Features
Compact and space-saving
Double Speed Drive on the traverse axis The arm incorporates Double Speed Drive that telescopically slides the arm in two stages . It additionally keeps the arm retracted while the robot is in waiting status, making the robot compact and space-saving as a whole.
High precision
Highly rigid structure As a pretext to insert molding where precision accuracy is a must, both the robot body and arm feature a highly rigid design and construction.
Shorter mold open times
Thin arm The SVR-C50 employs a thin arm that gets inside molds through tighter openings. The tighter opening means that molds stay open for less time, which translates into shorter molding cycles.
Shorter molding cycles
High-speed operation The full dry cycle * required to insert a workpiece or take out molded parts is a fast 1.53 sec. * Yushin has internal standards for the strokes and timers (wait time at each position) that dry cycle calculations are based on.
Compatible controllers
E-touch Lite II

Series lineup




Related robots

HOP Five
Standard Swing Type Runner Take-out Robots

miniHOP
Ultra-Compact Swing-Type Runner Take-out Robots

N-HOP
Single-Axis Servo Swing Type Runner Take-out Robots
Get a quote on the SVR-C50.
Share your molding machine, part and cycle target. A Yushin specialist will confirm the right model and options for your cell.
