Standard Take-out Robots

YD Series

Standard Take-out Robots

YD/YDII series: Standard Take-out Robots

46% Better Flexural Rigidity Than Previous Model, and 13% Reduction in Vibration Amplitude

YD series robots utilize parts constructed of CFRPv3(*) and gained 46% improvement in flexural rigidity as well as a 13% reduction in single-arm vibration amplitude, compared to previous models. Stable operation with less vibration helps raise productivity by preventing scratches or damage to products during take-out, and reducing the occurrence of take-out failures.

Clamping force
30 tf or less30-100 tf350-500 tf500-800 tf800-1,000 tf1,000-1,300 tf
Max payload
35 kg or greater30-40 kg40-50 kg
Application
Taking Out ProductsTaking Out in Sync With Upstream/Downstream ProcessesTaking Out Products + Products
Find a salesperson

Overview

Enhanced design for higher productivity, less downtime, and lighter environment footprint.

Productivity Enhancements

(*): Third generation Carbon Fiber Reinforced Polymer that outperforms the CFRP used in previous YC series robots.

Teaching Enhancements

  • Cycle-Up function (PAT.P) - This feature displays required times per robot operation in a step-by-step list. This aid helps operators identify and target areas of the sequence to achieve shorter overall cycle times and raise productivity.
  • Manual Torque Monitor - Displays a torque gauge for each axis during robot teaching, to show operator how much load the robot bears in motion. This aid allows operators to observe slight fluctuations in torque and fine-tune difficult-to-teach programs, like for insert molding.
  • All-axis Manual Operation screen - Operators can see and control all axes on just a single screen, enhancing operability.
  • Highly Operable E-touch Compact3 - The E-touch compact3 takes the easy operability of the previous YC series controller and adds several assist features to become even easier to use.

Downtime-Preventing Enhancements

The robot automatically monitors vacuum pressure during take-out operations to identify patterns and assist in finding causes of take-out failures. Each vacuum circuit is monitored individually to more quickly find abnormal circuits. The robot records the frequency of take-out failures, so operators can more easily recognize when maintenance is needed, or more easily find causes after trouble occurs. Diagnosis results are displayed on the Take-Out Failure Details screen, where operators can see vacuum pressure values and bad take-out patterns that have occurred.

Productivity Enhancements

Utilizing CFRPv3

YD series robots utilize parts constructed of CFRPv3(*) and gained 46% improvement in flexural rigidity as well as a 13% reduction in single-arm vibration amplitude, compared to previous models. Stable operation with less vibration helps raise productivity by preventing scratches or damage to products during take-out, and reducing the occurrence of take-out failures.

All-axis Optimized Vibration Control

Our Design Optimization engineering plus CFRPv3 components and vibration-damping controls result in faster settling times.

Teaching Enhancements

Cycle-Up Function

This feature displays required times per robot operation in a step-by-step list. This aid helps operators identify and target areas of the sequence to achieve shorter overall cycle times and raise productivity.

Manual Torque Monitor

Displays a torque gauge of each axis during robot teaching, to show operator how much load the robot bears in motion. This aid allows operators to observe slight fluctuations in torque and fine-tune difficult-t0-teach programs, like for insert molding.

All-Axis Manual Operation Screen

Operators can see and control all axes on just a single screen, enhancing operability.

Downtime Preventing Enhancements

Take-out Diagnosis Function

The robot automatically monitors vacuum pressure during take-out operations to identify patterns and assist in finding causes of take-out failures. Each vacuum circuit is monitored individually to more quickly find abnormal circuits. The robot records the frequency of take-out failures, so operators can more easily fid caused after trouble occurs. Diagnosis results are displayed on the Take-Out Failure Details screen, where operators can see vacuum pressure values and bad take-out patterns that have occurred.

Predictive Maintenance

Continuously monitors robot during operation and alerts operator with a message if potential trouble symptoms are detected. This feature elevates maintenance from preventative to predictive.

Items that can be detected:

  • Motor overload warning
  • Battery voltage drop
  • Regenerative overload warning
  • Motor temperature rise

Compatible controllers

Highly Operable E-touch Compact3 Controller

The E-touch compact3 takes the easy operability of the previous YC series controller and adds several assist features to become even easier to use.

E-touch Compact3

Compatible Yushin controller

Series lineup

YD Series series model
YD Series series model
YD Series series model
YD Series series model
YD Series series model
YD Series series model
YD Series series model

Get a quote on the YD Series.

Share your molding machine, part and cycle target. A Yushin specialist will confirm the right model and options for your cell.

Sales(401) 463-1800
24/7 service hotline(888) 70-ROBOT
Emailsalesinfo@yushin.com
North American headquarters35 Kenney Drive, Cranston, RI 02920
Request a quote

Molding application survey

Tap what fits and skip anything you're not sure of. A Yushin specialist will take it from there.

Step 1 of 3

Your molding machine

Molding machine size (tonnage)
Number of cavities
Molding cycle time