CE Certified certified

CE Certified

ISO Class 6 Clean Room certified

ISO Class 6 Clean Room

IP44 Compliant certified

IP44 Compliant

Cartesian Take-Out Robots for Injection Molding Automation

Cartesian take-out robots use linear motion to enter the mold area, remove molded parts, and place them at a downstream location such as a conveyor, fixture, inspection station, or packaging process. In injection molding, this architecture fits the repeatable pick-and-place geometry of the molding cell: a fixed pick point at the mold and a fixed place point downstream. Yushin America helps molders select Cartesian take-out automation based on IMM layout, part weight plus EOAT, cycle-time requirements, mold access, and downstream handling needs.

RC-SE – High-End High-Speed Take-out Robot
SX-41 High-Speed Side-Entry Robot
HST: High-Speed Take-out Robots
HSA: Super-High-Speed Take-out Robots
CT/CT2: Clamp-End Traverse Take-out Robots
YD/YD2 Series: Standard Take-out Robots
MKA-2000S Large Take-out Robot
LA Series: Large Take-out Robots
FRA Series: High-End Take-out Robots
NC Servo Wrist Units
End-of-Arm Tooling (EOAT)

Our Range of Products
RC-SE – High-End High-Speed Take-out Robot

RC-SE – High-End High-Speed Take-out Robot

  • Up to 78% air savings via Smart ECO Vacuum
  • 50 kg max payload across multiple variants
  • IP44-rated E-touch II controller included
SX-41 High-Speed Side-Entry Robot

SX-41 High-Speed Side-Entry Robot

  • 0.32 sec take-out with ISO Class 6 compliance
  • 29% air savings via ECO Vacuum system
  • CE certified, aluminum frame for low ceilings
HST: High-Speed Take-out Robots

HST: High-Speed Take-out Robots

  • Optimized for sub-10-second molding cycles
  • IML-ready with optional label-assist module
  • 3-axis high-acceleration AC servo drive
HSA: Super-High-Speed Take-out Robots

HSA: Super-High-Speed Take-out Robots

  • Super-high-speed 3-axis AC servo take-out
  • Sub-5-second cycle IML & packaging ready
  • Double-wing EOAT for label-place and extract
CT/CT2: Clamp-End Traverse Take-out Robots

CT/CT2: Clamp-End Traverse Take-out Robots

  • 26% less power via Optimum Design approach
  • 75% air reduction with ECO Vacuum standard
  • 72% shorter settling time with CFRP construction
YD/YD2 Series: Standard Take-out Robots

YD/YD2 Series: Standard Take-out Robots

  • 46% stiffer CFRPv3 arm reduces part damage risk
  • Cycle-Up Function optimizes cycle time step-by-step
  • Predictive maintenance alerts before failures occur

Showing 1 to 6 of 11 results

Frequently Asked Questions

What is a Cartesian take-out robot?

A Cartesian take-out robot moves along linear X, Y, and Z axes to extract a molded part from the injection molding machine and place it at a downstream location. This is the standard automation architecture for injection molding part extraction.

Why do Cartesian robots fit injection molding so well?

How do Cartesian robots compare with articulated robots for injection molding?

How does EOAT affect Cartesian robot selection?

Does Yushin America sell injection molding machines?

How do I choose the right Yushin Cartesian robot?

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

Industries We Serve

Automotive

Automotive

Extract bumper fascias, instrument panels, door panels, and sensor housings from large-tonnage IMMs with precision.

Packaging & Thin-Wall

Packaging & Thin-Wall

High-speed IML and take-out robots for dairy tubs, caps, closures, and food containers on sub-5-second cycles.

Medical & Pharmaceutical

Medical & Pharmaceutical

ISO Class 6 clean-room-compatible robots for syringes, IV components, vials, and precision medical micro-components.

Electronics & Micromolding

Electronics & Micromolding

Micromolding-tuned SXC series robots handle micro-connectors, encapsulated MEMS housings, and precision optical parts.

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

You might also like

RC-SE – High-End High-Speed Take-out Robot | Compact 3 & 4 Axis Cartesian Robots

Compact 3 & 4 Axis Cartesian Robots

Compact 3- and 4-axis Cartesian take-out robots are built for molding cells where floor space, mold access, and cycle time are tight constraints. The 3 primary linear axes handle standard extraction and downstream placement; an optional 4th axis - a flip or servo wrist - adds controlled orientation for applications that need it. These compact platforms are commonly used for small-to-mid-size molded parts, medical and electronics components, and cells where a smaller robot footprint matters. Yushin America matches robot size, payload including EOAT, and axis configuration to your specific IMM and part requirements.
RC-SE – High-End High-Speed Take-out Robot | Cartesian Robots — Explosion-Proof Design

Cartesian Robots — Explosion-Proof Design

The cost of a Cartesian take-out robot depends on the injection molding cell it must support, not only the robot model. Key pricing factors include IMM size and layout, cycle-time requirements, payload including EOAT, part geometry, mold access, axis configuration, wrist or orientation needs, downstream placement, integration scope, installation, training, and service requirements. Yushin America helps molders evaluate these factors and request the right take-out robot configuration for their production needs.
PA Series – Compact Palletizing Robot | 4-Axis Cartesian Robots Guide

4-Axis Cartesian Robots Guide

This guide covers Yushin America's 4-axis Cartesian robots for injection molding automation, including traverse take-out, side-entry, palletizing, and sprue-picker models. Engineered for precision, speed, and lights-out operation, these robots serve automotive, medical, packaging, and appliance manufacturing industries across payloads from under 2 kg to 80+ kg.

Why Injection Molders Choose Yushin America

50+ Years of Molding Automation

Founded in 1973, Yushin has pioneered take-out robot technology across 13 global subsidiaries, bringing unmatched depth of application expertise to every molding cell.

Full-Spectrum Robot Lineup

From sub-150-ton sprue pickers to 3,000-ton heavy-duty extractors, Yushin's Cartesian robot range covers every IMM size, speed class, and payload requirement under one platform.

Industry-Leading Service & Support

24/7 phone support, a nationwide network of service engineers, IoT-based remote diagnostics via INTU LINE, and predictive maintenance tools minimize unplanned downtime.

Get a Quote for Your Injection Molding Cell

Submit your requirements and a Yushin America specialist will respond with model recommendations, pricing, and application guidance tailored to your press tonnage and cycle targets.

Contact Us Today

For immediate assistance, feel free to give us a direct call at 1-401-463-1800. You can also send us a quick email at salesinfo@yushin.com.