CE Certified certified

CE Certified

IP44 Compliant certified

IP44 Compliant

Safety Category 3 certified

Safety Category 3 Certified

Full-Servo Traverse Take-Out Robots for Injection Molding

Full-servo traverse take-out robots use servo-driven axes across their traverse, kick, and vertical stroke motion to deliver precise, repeatable part extraction and placement. This servo control matters for cycle time, consistent EOAT positioning, and part protection - the robot returns to the same position within a tight tolerance on every cycle. Yushin America builds take-out robots around servo-driven axes for standard, high-speed, and large-format injection molding applications, matched to your IMM size, part weight plus EOAT weight, and cycle time requirements.

RC-SE – High-End High-Speed Take-out Robot
HST: High-Speed Take-out Robots
HSA: Super-High-Speed Take-out Robots
CT/CT2: Clamp-End Traverse Take-out Robots
YD/YD2 Series: Standard Take-out Robots
MKA-2000S Large Take-out Robot
LA Series: Large Take-out Robots
FRA Series: High-End Take-out Robots
NC Servo Wrist Units
End-of-Arm Tooling (EOAT)

Our Range of Products
RC-SE – High-End High-Speed Take-out Robot

RC-SE – High-End High-Speed Take-out Robot

  • 78% air savings via Smart ECO Vacuum tech
  • All-axis vibration control for faster cycles
  • Payload range: 5–50 kg, 30 tf–1300 tf IMMs
HST: High-Speed Take-out Robots

HST: High-Speed Take-out Robots

  • Optimized for sub-10-second molding cycles
  • IML-ready with optional label-assist module
  • 3–10 kg payload for thin-wall packaging
HSA: Super-High-Speed Take-out Robots

HSA: Super-High-Speed Take-out Robots

  • Sub-5-second cycles for thin-wall packaging
  • IML-ready with double-wing EOAT support
  • Fleet-compatible recipes with YD/HST series
CT/CT2: Clamp-End Traverse Take-out Robots

CT/CT2: Clamp-End Traverse Take-out Robots

  • 72% shorter settling time vs. predecessor
  • 75% less air use via ECO Vacuum circuit
  • 26% power reduction with lower duty motors
YD/YD2 Series: Standard Take-out Robots

YD/YD2 Series: Standard Take-out Robots

  • 46% better flexural rigidity with CFRPv3
  • Covers 50–850 ton IMMs (YD & YD2)
  • Predictive maintenance monitors all axes
MKA-2000S Large Take-out Robot

MKA-2000S Large Take-out Robot

  • 30–80+ kg payload for heavy-duty parts
  • Compatible with 800–3000 ton IMMs
  • Palletizer & assembly cell integration ready

Showing 1 to 6 of 10 results

Frequently Asked Questions

What is a full-servo traverse take-out robot?

A full-servo traverse take-out robot uses servo-driven motors with closed-loop feedback across its traverse, kick, and vertical stroke axes, delivering precise, repeatable positioning for part extraction and downstream placement in injection molding.

How do servo-driven axes help take-out consistency?

When are full-servo traverse robots preferred over simpler take-out options?

How do EOAT and part weight affect robot selection?

Are full-servo traverse robots the same as articulated robot arms?

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

Industries We Serve

Automotive Manufacturing

Automotive Manufacturing

Servo traversing robots extract bumper fascias, instrument panels, door trims, and battery trays from high-tonnage automotive IMMs.

Food & Beverage Packaging

Food & Beverage Packaging

Super-high-speed HSA and HST robots handle thin-wall food containers, dairy tubs, and caps on sub-10-second cycle IMMs.

Appliance & White Goods

Appliance & White Goods

Large-tonnage servo robots extract washer drums, dishwasher tubs, and refrigerator interior parts from mid-to-large IMMs reliably.

Medical & Pharmaceutical

Medical & Pharmaceutical

Precision RC-SE and FRA robots handle medical disposables and pharma packaging with clean part handling and repeatable accuracy.

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

You might also like

Servo Picker | 3-Axis Servo Driven Take-out Robot - Choose Your Model

3-Axis Servo Driven Take-out Robot - Choose Your Model

The 3-Axis Linear Actuators page covers Yushin America's YD-0310 servo picker — a compact 3-axis AC servo linear actuator robot engineered for sub-100-ton injection molding machines. Ideal for small medical, electronics, and consumer parts, it bridges the gap between pneumatic sprue pickers and full take-out robots.
RC-SE – High-End High-Speed Take-out Robot | Compact 3 & 4 Axis Cartesian Robots

Compact 3 & 4 Axis Cartesian Robots

Compact 3- and 4-axis Cartesian take-out robots are built for molding cells where floor space, mold access, and cycle time are tight constraints. The 3 primary linear axes handle standard extraction and downstream placement; an optional 4th axis - a flip or servo wrist - adds controlled orientation for applications that need it. These compact platforms are commonly used for small-to-mid-size molded parts, medical and electronics components, and cells where a smaller robot footprint matters. Yushin America matches robot size, payload including EOAT, and axis configuration to your specific IMM and part requirements.
RC-SE – High-End High-Speed Take-out Robot | Heavy-Duty Traverse Servo Take-Out Robots for Large Injection Molding Machines

Heavy-Duty Traverse Servo Take-Out Robots for Large Injection Molding Machines

Heavy-duty traverse servo take-out robots are built for large molded parts and large injection molding machines - automotive structural components, appliance housings, and industrial equipment parts. These robots require extended traverse beams, higher payload capacity including EOAT, and multi-stage vertical arms to reach and support large mold spaces. Yushin America's MKA-2000S large full-servo traverse robot is designed for molding machines of 1,500 tons or larger, handling up to 50 kg including EOAT. Application engineering review helps match the robot, EOAT, and traverse configuration to your specific large-part molding cell.

Why Plastics Manufacturers Choose Yushin America

50+ Years of Injection Molding Expertise

Since 1973, Yushin has pioneered take-out robot automation for injection molding, delivering proven reliability across thousands of global plastics facilities.

Full-Range Servo Robot Portfolio

From compact servo pickers for sub-150-ton presses to heavy-duty MKA-class arms for 3000-ton IMMs, Yushin covers every production scale with purpose-built robots.

Lights-Out Automation Capability

Yushin's IoT-enabled INTU LINE service, predictive maintenance, and ECO Vacuum systems are engineered to sustain fully unattended, high-OEE molding operations.

Get Expert Guidance on Your Take-out Robot Needs

Submit your inquiry and a Yushin America specialist will respond with tailored robot recommendations and pricing for your IMM application.

Contact Us Today

For immediate assistance, feel free to give us a direct call at 1-401-463-1800. You can also send us a quick email at salesinfo@yushin.com.