XY Cartesian Gantry Robots for Precision Tasks

Yushin offers four speed tiers: Standard (YD/YD2, CT/CT2), High-Speed (HST, SXB, SX-41), Super-High-Speed (HSA, TSXA, SXC family), and High-End Precision (FRA, RC-SE). Each tier is matched to specific cycle-time targets, ranging from general-purpose molding to sub-3-second IML packaging cells.

Side-entry robots — especially the TSXA and HSA series — are the canonical IML choice. They support double-wing EOAT for simultaneous label placement and part extraction on a single mold-open pass, minimizing chase time on thin-wall packaging programs running sub-5-second cycles.

Yushin's gantry robot range covers presses from approximately 20 ton (micromolding, V-HOP) to over 2,500 ton (LA Series, MKA-2000S). Standard YD/YD2 models handle 50–850 ton, while FRA and large-class robots extend to 1,500 ton and beyond for automotive and appliance applications.

Yes. The SX-41 side-entry robot is ISO Class 6 certified (per ISO 14644-1), features sealed bearings and FDA-grade lubricants, and is configurable to ISO Class 7/8 cells. The SXC micromolding series and HSA are also suitable for medical packaging applications requiring controlled particulate environments.

Absolutely. Yushin's controllers include recipe memory, predictive maintenance alerts, and IoT-based remote monitoring via INTU LINE. The YD/YD2 and FRA series are commonly deployed as anchor robots in fully automated cells paired with sprue separators, runner grinders, vision stations, and downstream PA Series palletizing robots.

Payload ranges span from under 1 kg for pneumatic sprue pickers (HOP Five, V-HOP) to 65+ kg for large take-out robots (LA Series, MKA-2000S). Mid-range servo take-out robots like the YD/YD2 typically handle 5–50 kg, covering the majority of standard injection molding part-extraction applications.